? semiconductor components industries, llc, 2012 august, 2012 ? rev. 1 1 publication order number: NIC5004TS1/d NIC5004TS1, nic5004ats1 self-protected fet with temperature and current limit 40 v, 6.5 a, single n ? channel self?protected fets are a series of power mosfets which utilize on semiconductor hdplus technology. the self?protected mosfet incorporates protection features such as integrated thermal and current limits. the self ? protected mosfets include an integrated drain ? to ? gate clamp that provides overvoltage protection from transients and avalanche. the device is protected from electrostatic discharge (esd) by utilizing an integrated gate ? to ? source clamp. mosfet maximum ratings (t j = 25 c unless otherwise noted) rating symbol value unit drain ? to ? source voltage internally clamped v dss 44 vdc gate ? to ? source voltage v gs 14 vdc drain current continuous i d internally limited operating and storage temperature range (note 1) t j , t stg ? 55 to 150 c electrostatic discharge capability human body model (hbm) machine model (mm) esd >4000 >400 v stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. normal pre ? fault operating range. drain source temperature limit gate input current limit current sense r g overvoltage protection esd protection v dss (clamped) r ds(on) typ i d typ (limited) 40 v 110 m @ 10 v 6.5 a http://onsemi.com see detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. ordering information
NIC5004TS1, nic5004ats1 http://onsemi.com 2 mosfet electrical characteristics (t j = 25 c unless otherwise noted) (note 2) characteristic symbol min typ max unit off characteristics drain ? to ? source clamped breakdown voltage (v gs = 0 v, i d = 2 ma) v (br)dss 36 40 44 v zero gate voltage drain current (v ds = 32 v, v gs = 0 v) i dss ? 27 100 a gate input current (v gs = 5.0 v, v ds = 0 v) i gss ? 45 200 a on characteristics gate threshold voltage (v ds = v gs , i d = 150 a) v gs(th) 1.0 1.85 2.2 v static drain ? to ? source on ? resistance (v gs = 10 v, i d = 2.0 a) r ds(on) ? 110 130 m static drain ? to ? source on ? resistance (v gs = 5.0 v, i d = 2.0 a) r ds(on) ? 130 150 m source ? drain forward on voltage (i s = 7.0 a, v gs = 0 v) v sd ? 0.9 1.1 v self protection characteristics (t j = 25 c unless otherwise noted) current limit v ds = 10 v, v gs = 5.0 v, t j = 25 c v ds = 10 v, v gs = 5.0 v, t j = 100 c v ds = 10 v, v gs = 10 v, t j = 25 c i lim ? ? ? 6.5 5.5 7.9 ? ? ? a 2. wafers tested prior to sawing. ordering information device package shipping ? NIC5004TS1 die ? in ? reel carrier 3500 / reel nic5004ats1 die ? in ? reel carrier 3500 / reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
NIC5004TS1, nic5004ats1 http://onsemi.com 3 layout view of the die in reel NIC5004TS1/d hdplus is a trademark of semiconductor components industries, llc (scillc) publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative on semiconductor and are registered trademarks of semiconductor co mponents industries, llc (scillc). scillc owns the rights to a numb er of patents, trademarks, copyrights, trade secrets, and other intellectual property. a list ing of scillc?s product/patent coverage may be accessed at ww w.onsemi.com/site/pdf/patent ? marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. all operating parame ters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or a uthorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in whic h the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or us e scillc products for any such unintended or unauthorized appli cation, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unin tended or unauthorized use, even if such claim alleges that scil lc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyrig ht laws and is not for resale in any manner.
|
